Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa

PDF
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 1 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 2 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 3 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 4 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 5 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 6 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 7 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 8 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 9 - Agronetto
Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa | Slika 10 - Agronetto
Zainteresirani ste za oglas?
1/10
PDF
Cijena:
na upit
Zatražite cijenu
Kontaktirajte prodavatelja
Lokacija: Ukrajina m.Dnipro8446 km to "United States/Columbus"
Kataloški broj prodavatelja: 10539
Datum objavljivanja: 24. svi 2025.
Opis
Širina hvatanja: 6,5 m
Stanje
Stanje: novi

Dodatne informacije — Novi Verti-till turbo cultivator Green Wave 6.5 m Euro kultivator za strništa

In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:


field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.


Advantages and design features of the Green Wave Euro vertical tillage turbo cultivator with a working width of 6.5 m:


it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.


Basic equipment:


turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.


Additional equipment:


tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).


Specifications:

Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 6.5
Working length, m ... 8
Length during transportation, m ... 8
Height during transportation, m ... 3.9
Width during transportation, m ... 2.95
Total weight, t ... 6.85
Number of spring blocks, pcs … 20
Number of turbo disks, pcs ... 40
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 280
When deep processing is recommended, hp ... 330
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Prikaži cijeli komentar
Važno
Ova ponuda је informativnog karaktera. Za više detalja, pitajte prodavatelja.
Savjeti za kupnju
Savjeti za sigurnost
Provjera prodavatelja

Ako odlučite kupiti opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavateljem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava tvrtka. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.

Provjera cijena

Prije nego što odlučite izvršiti kupnju, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati ​​na skrivene nedostatke ili pokušaj prodavača da počini prijevaru.

Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.

Nemojte davati suglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati pojasniti pojedinosti, zatražiti dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.

Sumnjivo plaćanje unaprijed

Najčešći tip prijevare. Nepošteni prodavatelji mogu zatražiti određeni iznos predujma kako bi "zarezervirali" vaše pravo na kupnju opreme. Dakle, prevaranti mogu prikupiti veliki iznos i nestati, i više se ne pojavljivati.

Varijante ovakve prijevare mogu uključivati:
  • Prijenos pretplate na karticu
  • Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tijekom komuniciranja prodavatelj postao sumljiv.
  • Prijenos na račun "povjerenika"
  • Takav zahtjev treba biti alarmantan, najvjerojatnije komunicirate s prevarantom.
  • Prijenos na račun tvrtke s sličnim imenom
  • Budite oprezni, prevaranti se mogu prikriti iza poznatih tvrtki, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv tvrtke sumnjiv.
  • Zamjena vlastitih podataka u fakturi stvarne tvrtke
  • Prije prijenosa, provjerite jesu li navedeni detaljie ispravni i odnose li se na navedenu tvrtku.
Pronašli ste prevaranta?
Javite nam
Savjeti za sigurnost
PDF
Prodajete tehniku?
Učinite to s nama!
Slični oglasi
Cijena na upit
Širina hvatanja 6,5 m Dubina obrade 180 mm Potrebna snaga traktora 280 k.s.
Ukrajina, m.Dnipro
Kontaktirajte prodavatelja
novi Disk-share harrow 4.2 m kultivator za strništa novi Disk-share harrow 4.2 m kultivator za strništa
2
Cijena na upit
Širina hvatanja 4,2 m Dubina obrade 400 mm Potrebna snaga traktora 280 k.s. Radna brzina 15 km/h
Ukrajina, m.Dnipro
Kontaktirajte prodavatelja
novi Spring teeth and cables 3M, 2секции under tilling machines kultivator za strništa novi Spring teeth and cables 3M, 2секции under tilling machines kultivator za strništa novi Spring teeth and cables 3M, 2секции under tilling machines kultivator za strništa
3
191 € 9.033 UAH
Širina hvatanja 3 m
Ukrajina, m.Dnipro
Kontaktirajte prodavatelja
Cijena na upit
Širina hvatanja 18,2 m
Ukrajina, m.Dnipro
Kontaktirajte prodavatelja
35.000 USD ≈ 30.740 €
2006
Ukrajina, Farbovane
Kontaktirajte prodavatelja
25.000 USD ≈ 21.960 €
Širina hvatanja 11,7 m Dubina obrade 127 mm Potrebna snaga traktora 350 k.s. Radna brzina 8 km/h
Ukrajina
Kontaktirajte prodavatelja
11.650 € Sa PDV-om
2019
Širina hvatanja 3 m Dubina obrade 250 mm Potrebna snaga traktora 130 k.s.
Ukrajina, Shumskoy r-n, s. V.Dederkaly
Kontaktirajte prodavatelja
Lemken KOMPAKTOR kultivator za strništa Lemken KOMPAKTOR kultivator za strništa
2
12.000 €
2006
Širina hvatanja 6 m
Ukrajina, Kyiv
Kontaktirajte prodavatelja
5.600 USD ≈ 4.918 €
2020
Širina hvatanja 3 m Dubina obrade 120 mm Potrebna snaga traktora 90 k.s.
Ukrajina
Kontaktirajte prodavatelja
Cijena na upit
2022
Ukrajina
Kontaktirajte prodavatelja
Cijena na upit
2024
Širina hvatanja 5 m Dubina obrade 250 mm Potrebna snaga traktora 170 k.s.
Ukrajina, Shumskoy r-n, s. V.Dederkaly
Kontaktirajte prodavatelja
Cijena na upit
2012
Širina hvatanja 13,5 m
Ukrajina, Zolochiv
Kontaktirajte prodavatelja
15.300 € Sa PDV-om
2025
Širina hvatanja 3 m Dubina obrade 250 mm Potrebna snaga traktora 140 k.s.
Ukrajina, Lutsk
Kontaktirajte prodavatelja
12.000 USD ≈ 10.540 €
2004
Širina hvatanja 6,5 m
Ukrajina
Kontaktirajte prodavatelja
9.200 € Sa PDV-om
2025
Širina hvatanja 3 m Dubina obrade 300 mm Potrebna snaga traktora 150 k.s.
Ukrajina, Lutsk
Kontaktirajte prodavatelja
1 €
Širina hvatanja 6 m Dubina obrade 300 mm Potrebna snaga traktora 240 k.s.
Ukrajina, Mironovka
Kontaktirajte prodavatelja
Cijena na upit
2025
Dubina obrade 250 mm
Ukrajina, Lutsk
Kontaktirajte prodavatelja
19.800 € Sa PDV-om
2022
Širina hvatanja 3 m Potrebna snaga traktora 200 k.s.
Ukrajina, Lutsk
Kontaktirajte prodavatelja
14.000 USD ≈ 12.300 €
Širina hvatanja 4,8 m
Ukrajina
Kontaktirajte prodavatelja
19.000 USD ≈ 16.690 €
2008
Širina hvatanja 5 m Dubina obrade 350 mm
Ukrajina, Ohinki
Kontaktirajte prodavatelja